Configuration settings
The main Memgraph configuration file is available in
/etc/memgraph/memgraph.conf . You can modify that file to suit your specific
needs. Additional configuration can be specified by including another
configuration file, in a file pointed to by the MEMGRAPH_CONFIG environment
variable or by passing arguments on the command line.
Each configuration setting is in the form: --setting-name=value .
You can check the current configuration by using the following query (privilege level CONFIG is required):
SHOW CONFIG;
Bolt
| Flag | Description | Type |
|---|---|---|
| --bolt-address=0.0.0.0 | IP address on which the Bolt server should listen. | [string] |
| --bolt-cert-file= | Certificate file which should be used for the Bolt server. | [string] |
| --bolt-key-file= | Key file which should be used for the Bolt server. | [string] |
| --bolt-num-workers= | Number of workers used by the Bolt server. By default, this will be the number of processing units available on the machine. | [int32] |
| --bolt-port=7687 | Port on which the Bolt server should listen. | [int32] |
| --bolt-server-name-for-init= | Server name which the database should send to the client in the Bolt INIT message. | [string] |
| --bolt-session-inactivity-timeout=1800 | Time in seconds after which inactive Bolt sessions will be closed. | [int32] |
note
Memgraph does not limit the maximum amount of simultaneous sessions. Transactions within all open sessions are served with a limited number of Bolt workers simultaneously.
Query
| Flag | Description | Type |
|---|---|---|
| --query-cost-planner=true | Use the cost-estimating query planner. | [bool] |
| --query-execution-timeout-sec=180 | Maximum allowed query execution time. Queries exceeding this limit will be aborted. Value of 0 means no limit. | [uint64] |
| --query-max-plans=1000 | Maximum number of generated plans for a query. | [uint64] |
| --query-modules-directory=/usr/lib/memgraph/query_modules | Directory where modules with custom query procedures are stored. NOTE: Multiple comma-separated directories can be defined. | [string] |
| --query-plan-cache-ttl=60 | Time to live for cached query plans, in seconds. | [int32] |
| --query-vertex-count-to-expand-existing=10 | Maximum count of indexed vertices which provoke indexed lookup and then expand to existing, instead of a regular expand. Default is 10, to turn off use -1. | [int64] |
Storage
| Flag | Description | Type |
|---|---|---|
| --storage-gc-cycle-sec=30 | Storage garbage collector interval (in seconds). | [uint64] |
| --storage-properties-on-edges=true | Controls whether edges have properties. | [bool] |
| --storage-recover-on-startup=true | Controls whether the storage recovers persisted data on startup. | [bool] |
| --storage-snapshot-interval-sec=300 | Storage snapshot creation interval (in seconds). Set to 0 to disable periodic snapshot creation. | [uint64] |
| --storage-snapshot-on-exit=true | Controls whether the storage creates another snapshot on exit. | [bool] |
| --storage-snapshot-retention-count=3 | The number of snapshots that should always be kept. | [uint64] |
| --storage-wal-enabled=true | Controls whether the storage uses write-ahead-logging. To enable WAL periodic snapshots must be enabled. | [bool] |
| --storage-wal-file-flush-every-n-tx=100000 | Issue a 'fsync' call after this amount of transactions are written to the WAL file. Set to 1 for fully synchronous operation. | [uint64] |
| --storage-wal-file-size-kib=20480 | Minimum file size of each WAL file. | [uint64] |
| --storage-items-per-batch=1000000 | The number of edges and vertices stored in a batch in a snapshot file. | [uint64] |
| --storage-recovery-thread-count= | The number of threads used to recover persisted data from disk. | [uint64] |
| --storage-parallel-index-recovery=false | Controls whether the index creation can be done in a multithreaded fashion during recovery. | [bool] |
Streams
| Flag | Description | Type |
|---|---|---|
| --kafka-bootstrap-servers | List of Kafka brokers as a comma separated list of broker host or host:port. | [string] |
| --pulsar-service-url | The service URL that will allow Memgraph to locate the Pulsar cluster. | [string] |
| --stream-transaction-conflict-retries=30 | Number of times to retry a conflicting transaction of a stream. | [uint32] |
| --stream-transaction-retry-interval=500 | The interval to wait (measured in milliseconds) before retrying to execute again a conflicting transaction. | [uint32] |
Other
| Flag | Description | Type |
|---|---|---|
| --allow-load-csv=true | Controls whether LOAD CSV clause is allowed in queries | [bool] |
| --also-log-to-stderr=false | log messages go to stderr in addition to logfiles | [bool] |
| --data-directory=/var/lib/memgraph | Path to directory in which to save all permanent data. | [string] |
| --init-file | Path to the CYPHERL file which contains queries that need to be executed before the Bolt server starts, such as creating users | [string] |
| --init-data-file | Path to the CYPHERL file, which contains queries that need to be executed after the Bolt server starts | [string] |
| --isolation-level=SNAPSHOT_ISOLATION | Isolation level used for the transactions. Allowed values: SNAPSHOT_ISOLATION, READ_COMMITTED, READ_UNCOMMITTED | [string] |
| --log-file=/var/log/memgraph/memgraph.log | Path to where the log should be stored. | [string] |
| --log-level=WARNING | Minimum log level. Allowed values: TRACE, DEBUG, INFO, WARNING, ERROR, CRITICAL | [string] |
| --memory-limit=0 | Total memory limit in MiB. Set to 0 to use the default values which are 100% of the physical memory if the swap is enabled and 90% of the physical memory otherwise. | [uint64] |
| --metrics-address | Host for HTTP server for exposing metrics. | [string] |
| --metrics-port | Port for HTTP server for exposing metrics. | [uint64] |
| --memory-warning-threshold=1024 | Memory warning threshold, in MB. If Memgraph detects there is less available RAM it will log a warning. Set to 0 to disable. | [uint64] |
| --password-encryption-algorithm=bcrypt | Algorithm used for password encryption. Defaults to BCrypt. Allowed values: bcrypt, sha256, sha256-multiple (SHA256 with multiple iterations) | [string] |
| --replication-replica-check-delay-sec | The time duration in seconds between two replica checks/pings. If < 1, replicas will not be checked at all. The MAIN instance allocates a new thread for each REPLICA. | [uint64] |
| --telemetry-enabled=true | Set to true to enable telemetry. We collect information about the running system (CPU and memory information), information about the database runtime (vertex and edge counts and resource usage), and aggregated statistics about some features of the database (e.g. how many times a feature is used) to allow for an easier improvement of the product. | [bool] |
Environment variables
| Variable | Description | Type |
|---|---|---|
| MEMGRAPH_USER | Username | [string] |
| MEMGRAPH_PASSWORD | User password | [string] |
| MEMGRAPH_PASSFILE | Path to file that contains username and password for creating user. Data in file should be in format username:password if your username or password contains : just add \ before for example us\:ername:password | [string] |
Additional configuration inclusion
You can define additional configuration files in the main configuration file or
within a Docker command in the terminal. Additional files are processed after
the main configuration file and they override the main configuration file.
Additional configuration files are specified with the --flag-file flag.
Example:
--flag-file=another.conf